Safety Topic: Table Saws — Precision Cuts, Serious Hazards
Did You Know?
Over 30,000 table saw injuries occur annually, many involving severe hand or finger lacerations. [3]
KNOW THE RISK
- Table saws consist of a circular blade protruding through the top of a flat work surface, used primarily for woodworking. [2]
- They are particularly dangerous because the operator’s hands are often in close proximity to the blade, with no automatic retraction. [2]
- Lacerations to the hands and fingers are the most common table saw injuries. Some cases result in amputations or permanent nerve damage. [3]
- Kickback — when the saw throws material back toward the operator — is another major hazard, often caused by improper feeding or blade alignment.
MITIGATE THE RISK
1. Always Wear Appropriate PPE
- Wear safety glasses, hearing protection, and avoid loose clothing or jewelry that could get caught. [1]
2. Adjust Blade Height Correctly
- The blade should extend no more than 1/4 to 1/2 inch above the material being cut to reduce the risk of contact injuries. [1]
3. Feed Material Properly
- Always feed the material against the blade’s rotation, and never reach over or behind the blade. Use push sticks or guides as needed. [1]
4. Use Safety Features
- Ensure the saw is equipped with a riving knife, blade guard, and anti-kickback pawls. These features significantly reduce injury risk. [1]
TOOL SAFETY REMINDER
Table saws are powerful tools capable of precise work — but one mistake can lead to permanent injury. Respect the tool, use guards, and follow safe feeding practices every time you cut.